Quick answer
The Buyorda MFCMG14211FR replacement water filter is designed as a replacement for filters marked MFCMG14211FR, MFCMG14211F, 502417010003 or 502417010002. However, a matching refrigerator brand or a similar-looking filter is not enough to confirm fit.
Before ordering, remove the original filter and compare its complete part number, connector shape, locking tabs and overall dimensions with the replacement. The Buyorda version is not compatible with FFRBI1844-36SB, FFRBI1844-36BLK or FFRBI1844-36WHT.
If any detail is different, do not force the filter into the housing. Send Buyorda Support the refrigerator model and clear photos of the original filter for a compatibility check.
Which filter numbers does this replacement fit?
This replacement is intended for the following filter references:
-
MFCMG14211FR
-
MFCMG14211F
-
502417010003
-
502417010002
The number should be taken from the label on the original filter whenever possible. A number found only in a general appliance manual, marketplace listing or search result may refer to a different production version.
You can view the available pack sizes on the Buyorda MFCMG14211FR replacement filter page.
Refrigerator models that should not use the Buyorda version
Do not order this Buyorda replacement for the following refrigerator models:
-
FFRBI1844-36SB
-
FFRBI1844-36BLK
-
FFRBI1844-36WHT
These refrigerators may be associated with similarly named filters in some listings, but the connection or filter housing can differ. For that reason, Buyorda does not list its current replacement as compatible with these three models.
Why can the same filter name still result in a poor fit?
Water-filter names are sometimes reused across appliance brands, distributors and regional versions. Two filters can have similar labels and a similar body shape while using different locking details.
Common differences include:
-
The number and position of the locking tabs
-
The shape of the keyed connector
-
The location or size of the water openings
-
The direction in which the filter twists and locks
-
The length or diameter of the filter body
-
A revised filter housing used in a later refrigerator production run
This is why the original filter is usually a better reference than the refrigerator brand alone.
Five checks to complete before ordering
1. Read the complete original filter number
Remove the existing filter and look for the full number printed on its label. Confirm every letter and digit. For example, MFCMG14211F and MFCMG14211FR are relevant references for this replacement, but a partially similar number should not be treated as a match.
2. Check the full refrigerator model
Find the appliance identification label inside the refrigerator compartment, on a side wall, behind a drawer or near the door frame. Record the complete model, including its final letters, numbers and color suffix.
3. Compare the connector end
Place the original filter and the replacement image in the same orientation. Compare:
-
Locking tabs
-
Grooves and raised sections
-
Water inlet and outlet openings
-
Center shape
-
Distance between connection points
Even one misplaced tab can prevent the filter from seating correctly.
4. Compare the filter body
Check the overall length, width and position of any shoulder or collar. A filter that looks almost identical can still be too long, too short or unable to rotate into the locked position.
5. Ask before ordering if anything is unclear
Send the following information to support@buyorda.com:
-
The complete refrigerator model
-
A clear photo of the original filter label
-
A close-up photo of the original filter connector
-
A photo showing the complete original filter
These details are more useful than the refrigerator brand alone and make it easier to identify a possible mismatch before shipment.
What should you do if the new filter does not fit?
Stop if the filter does not slide, twist or lock with normal hand pressure. Do not trim the tabs, modify the connector or force the filter into the housing. Doing so can damage the filter head or cause a leak.
Reinstall the original filter if it is still usable. Then compare the two filters side by side and photograph:
-
Both complete filters
-
Both connector ends from the same angle
-
The labels and part numbers
-
The refrigerator model label
Send the photos and order number to Buyorda Support so the difference can be reviewed.
How often should an MFCMG14211FR replacement be changed?
A general replacement interval is about six months, but the actual interval depends on water quality, household use and the refrigerator manufacturer's instructions. Replace the filter sooner if water flow drops noticeably or the taste and odor change.
After installation, flush the new filter according to the refrigerator instructions before drinking the water. Check the filter area for leaks during the first use.
Frequently asked questions
Is MFCMG14211F the same replacement reference as MFCMG14211FR?
The Buyorda replacement is designed for both MFCMG14211F and MFCMG14211FR references. You should still compare the original connector and complete refrigerator model before ordering.
Does this replacement fit 502417010003?
Yes. The Buyorda product lists 502417010003 as a compatible replacement reference. Confirm that the connector on your original filter matches the product images.
Does it replace 502417010002?
Yes. The current Buyorda replacement also lists 502417010002. Check the original filter label and connection interface before purchase.
Does it fit FFRBI1844-36SB?
No. The current Buyorda replacement is not listed as compatible with FFRBI1844-36SB. It is also not listed for FFRBI1844-36BLK or FFRBI1844-36WHT.
Can I confirm compatibility from the refrigerator brand alone?
No. The full refrigerator model, original filter number and connector shape provide a more reliable check than the brand alone.
What information should I send Buyorda for a fit check?
Send the refrigerator model, original filter number, a full photo of the original filter and a close-up of its connector to support@buyorda.com.
Check before you order
If your original filter is marked MFCMG14211FR, MFCMG14211F, 502417010003 or 502417010002, compare the connection interface with the product images before ordering. When the number or connector is unclear, contact Buyorda Support first.